| Printed Circuit Boards (PCB) | ||
| TS75/TS100 PCB | ||
 |
The TS PCB has an integrated decoder on the PCB. This uses 'silver backed' and also 'Oval' handsets Part Number: PE05004 * Remember to transfer the receiver board when replacing this PCB |
The power MUST be switched off before the following * Instructions on changing a PCB |
| TM60 PCB | ||
 |
The TM60 PCB also has an integrated decoder on the PCB. This uses 'silver backed' and also 'Oval' handsets Part Number: PE04104 * Remember to transfer the receiver board when replacing this PCB |
The power MUST be switched off before the following * Instructions on changing a PCB |
| C75 PCB | ||
 |
The C75 PCB also needs a decoder and a receiver Note: This can be either a 40MHz or 433MHz. Check which frequency before ordering handsets or receiver/decoder Part Number: PE00000-1 * Remember to transfer the receiver and decoder boards when replacing this PCB |
The power MUST be switched off before the following * Instructions on changing a PCB
|
| ST77 PCB (N/P) | ||
 |
These boards were fitted on all ST operators except the ST77M, and also on A60 and A45 operators This is a new print version PCB. The old print version was square in shape. When a new print board is used to replace an old print board a decoder will be required This uses 40MHz handsets * Remember to transfer the receiver board when replacing this PCB |
|
| ST77 PCB (O/P) | ||
 |
These boards were fitted on ST77 operators including ST77M and also on A60 and A45 operators This is a old print version PCB. the new print version is rectangular in shape. A new print board can be fitted with an old print PCB except for the ST77M This board does not require a decoder - the DIP switches perform this function This uses 40MHz handsets Part Number: PE30005 * Remember to transfer the receiver board when replacing this PCB |
|
