Optional Extras
Wireless Digi-Pad - 4 Channel New

433MHz, rolling code, 4 channels

Each channel can take one user code

One channel may be used per operator/receiver

Part Number: C20405

Compatibility:- RP-Series, TM-Series, TS-Series (inc. non Seip operators fitted with an external receiver as above)

 

Wireless Digi-Pad - 4 Channel NOW DISCONTINUED - SEE REPLACEMENT ABOVE C20405

433MHz, rolling code, 4 channels

Each channel can take one user code

One channel may be used per operator/receiver

Part Number:

* Programming Instructions

Compatibility:- RP-Series, TM-Series, TS-Series (inc. non Seip operators fitted with an external receiver as above)

 

External Mini-Receiver - 1 Channel

433MHz, rolling code, 1 channel

Power supply 18-36v AC/DC

For 25 remotes maximum

Part Number: B43A224061-2

 

* Programming Instructions

* Compatibility Information

* Homelink Information

 

Compatibility:- all model operators (inc. most non Seip operators)

 

External Mini-Receiver - 1 Channel

433MHz, rolling code, 1 channel

Power supply 230v AC

For 15 remotes maximum

Part Number: B43A224071

 

Compatibility:- RP-Series, TM-Series, TS-Series (inc. non Seip operators fitted with an external receiver as above)

 

 
Radio Upgrade Kits (Hand transmitter & Receiver)

For use where original handsets are discontinued and no longer available

Any operator use (also non Seip)

For Steel, Oval and Mini Transmitters only

Two different types available for either 24v or 230v supply

For inside use only

For a maximum of 15 Hands Transmitters

For further information, please click here

* Programming Instructions

* Compatibility Information

* Homelink Information

 

 
External 4 Channel Receiver 24v & 230V

4 channels, 230v or 24v

Splash proof housing

Impulse or permanent contact adjustable

Can also be used for switching lights on/off

Up to 256 remotes

Part Number: B43A224014-1

* For Light switching

* Programming Instructions

Compatibility:- All model operators with voltage free impulse (inc. most non Seip operators)

 

 
Photocell Infra Red, 24v

12-24v AC/DC

Maximum range: 30m

Power supply of 12v or 24v may be adjusted by means of jumper

Part Number: C21002

Instructions on connecting the photocells can be found within the installation manual for each operator.

 

Compatibility:- All Seip model operators

 

 
AZ Module

 

Auto closing Module AZ for TS series

Part Number: C40320

 

Compatibility:- TS-Series

 

 
Top Locking Kit

This part (part 1) can be used without part 2

(Part 1 of 2)

Part Number: C10220

Compatibility:- All model operators

 

 
Bottom Locking Kit

This part (part 2) cannot be used without the top locking kit (part 1)

(Part 2 of 2)

Part Number: C10201

Compatibility:- All model operators

 

External Emergency Release

 

 

With 2 round keys

Part Number: EC2102

* Fitting instructions

Compatibility:- All seip model operators (inc. most non Seip boom operators)

 

 
UKAP2000 Special Locking Kit

 

Part Number: AP2000

 

* Fitting Instructions - supplied on request

Compatibility:-

 

 
Rail Extension, 50cm or 100cm

Rail extension kits

Part Number: C10103 - 50cm

Part Number: C10101 - 100cm

* Instructions on changing the overall length of a Seip operator

* Instructions for extending a c-rail for all Seip operators

Compatibility:- TM-Series, TS-Series, Not RP60a

 

 
Bow Arm Conversion NOW DISCONTINUED

Bow arm conversion for canopy doors

Part Number:

Compatibility:- TS100 operator recommended

 

 
Door Arm Kit for side hinged doors

Maximum 3 metres opening width

Part Number: UKAP2006

* Fitting Instructions

* Instructions for fitting bottom locking kits

Compatibility:- TM80*, TS75, TS100 * a small wiring change will be required if using the TM80 (Max. 2 mins work)